Arc Welder Inverter IGBT DC 3 in 1 TIG/MMA Plasma Cutting Machine 220V Portable Welding Machine CT 418

Arc Welder Inverter IGBT DC 3 in 1 TIG/MMA Plasma Cutting Machine 220V Portable Welding Machine CT 418
  • Продавецwww.losangeleschargersvsnewyorkgiants.us
  • Список ценUS $175.63piece
  • Продажная ценаUS $175.63piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (206)

Oписание продукта

 

RSTAR IGBT INVERTER Multi-Function AC/DC TIG MMA Welding Machine apply to Aluminum, stainless steel, copper, carbon steel 

 

Product introduction

1,multi-usage, dc manual welding/argon welding conversion, ac/dc conversion

2, ac argon welding function can welding aluminum work piece, but long time welding 6 mm below the work piece
3, USES the advanced IGBT inverter technology, fast dynamic response, stability and good reliability
4, resistance to electric network fluctuation ability, AC (320 v, 460 v) can be normal welding
5, cleaning pulse width, current attenuation, gas delay and welding current can be regulated optionally
6, with 2t/ 4t function, convenient welding, enhance the efficiency of welding
7, three wind way design, improve the load duration rate
8, has the under voltage, over current, overheating protection function, safety performance is high

 Technical specifications:

Model

AC/DC 200P  AC/DC

input

voltage

AC220/230/240V  50Hz

 

AC TIG

No load voltage

60-80V

Base Current Adjusting range

20-200A

AC balance

30-70%

AC square wave frequency

20-100Hz

Rated Duty Cycle

60%

 

 

 

DC TIG

Pulse current adjusting range

5-200A

Rated Duty Cycle

60%

Current down-slope time

0-10S

Base Current Adjusting range

5-200A

Pluse Width Ratio

0.1-0.9

Pluse Frequency

0.5~25Hz

After flow time

1-25S

Arc starting Mode

High frequency arc striking

 

DC MMA

No load voltage

60-80V

Base Current Adjusting range

5-200A

Rate output current

180A

Rated Duty Cycle

60%

Efficiency

80%

Mass

14KG

Protection Class of enclosure

IP21S

Outline dimensions mm2

400X200X350

 

 

 

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

start

end